​DP10 Specifications:

Capacity Per Arm: 2500 lbs. (1134kg)
Overall Height: 143-3/8" (3642mm)
Overall Height with Extension: 160-3/4" (4083mm)
Minimum Ceiling Height: Minimum Ceiling Height 144" (3658mm)
Minimum Ceiling Height With Extension: 167" (4242mm)
Minimum Adapter Height: 3-5/8" (93mm)
Maximum Lifting Height: 76" (1930mm)
Maximum Lifting Height (High Rise Model): 79-1/2" (2019mm)
Adapter Extension Heights (stack Type): 1-3/4" (45mm), 3-1/2" (90mm), and 5" (120mm)
Front Arm Reach: 23"- 44-1/2" (584mm - 1130mm)
Rear Arm Reach: 38-1/2"- 58" (978mm - 1473mm)
Overall Floor Width: 136.5" (3467mm) or optional 131.5" (3340mm)
Inside Column Width: 114-1/2" (2908mm) or optional 108-1/2" (2756mm)
Drive Through: 104-1/2" (2654mm) or optional 98-1/2" (2502mm)

Voltage: 208/230v
Amps: 20
Motor: 2HP

Spot-Rite™ 3-Stage

Preferred Drive-in Arm Position
Front arms fold parallel to rear arms for clear vehicle drive-thru space
Arms swing to vehicle pick up points without front tire interference
Improve technician productivity with easy to spot arms
Spotting maneuverability improvement from the same side of column

Standard 3-Stage Arm Design

Restricted Drive-in Arm Position
Front arms do not fold parallel to rear arms next to column
Arms may interfere with vehicle at certain points.
Car must be placed more precisely to clear front tires - may require additional tech time to reposition vehicle.

The DP10A 2-post lift comes standard with offset, three-stage front arms. These arms fold parallel to the rear arms during vehicle drive-in . This allows them to be set in an asymmetric lifting position, behind the front tires during vehicle drive-in. The vehicle's lifting points can be easily and quickly spotted without having to reposition the vehicle back and forth to reach it's manufacture’s lift points.

Coastal Equipment Inc. Home Page

DP10A Features:

Low-Profile Design:

The DP10a features low-profile/oversized pads with multiple extensions to raise most vehicles on the road today. Includes four of each of the following extensions: 1.75", 3.5", and 5". 

Spot-Rite™ 3-Stage Front Arm Design:
The DP10A features offset arms to accommodate vehicles both symmetrically and asymmetrically. This feature allows the technician to position the vehicle doors in front of or behind the column to prevent door damage.

​​Forward DP10A Two Post Lift